The Variable Torque Management
4WD System (VTM-4) automatically
transfers varying amounts of engine
torque to the rear wheels under low
traction conditions.
If more traction is needed when your
MDX is stuck or is likely to become
stuck, you can use the VTM-4 Lock
button to increase torque to the rear
wheels. As soon as this feature is no
longer needed, press the VTM-4
Lock button again to disengage the
VTM-4 Lock.
Variable Torque Management 4WD System
Driving
VTM-4 Lock
217
Do not use the VTM-4 Lock button on
dry, paved roads. Driving on dry,
paved roads with VTM-4 Lock ON may
damage the rear differential when
making a turn. Strange noises and
vibration can also result.
01/09/07 12:29:39 31S3V610_222
To Next Page
Loading...
