If you use a non-Acura trailer
lighting harness and converter, you
cangetthematingconnectorand
pins that mate with the connector in
your vehicle from your Acura dealer.
Since lighting and wiring vary in
trailer type and brand, you should
also have a qualified mechanic install
a suitable connector between the
vehicleandthetrailer.
All states and Canadian provinces
require some type of trailer lights.
Check requirements for the areas
where you plan to tow.
To get to your vehicle’s trailer
lighting connector, open the tailgate,
remove the cargo cover, then
remove the rear panel trim. The
connector is on the left side. We
recommend that you have your
Acura dealer install an Acura wiring
harness and converter. This harness
has been designed and tested for
your vehicle.
Driving
Towing a Trailer
Trailer Lights
234
GGRROOUUNNDD
((BBLLAACCKK))
BBAACCKK--UUPP LLIIGGHHTT
((GGRREEEENN//BBLLAACCKK))
LLEEFFTT TTUURRNN SSIIGGNNAALL
((GGRREEEENN//BBLLUUEE))
TTAAIILLLLIIGGHHTT
((RREEDD//BBLLAACCKK))
BBRRAAKKEE LLIIGGHHTT
((WWHHIITTEE//BBLLAACCKK))
RRIIGGHHTT TTUURRNN SSIIGGNNAALL
((GGRREEEENN//YYEELLLLOOWW))
01/09/07 12:32:23 31S3V610_239
To Next Page
Loading...
Need help?
General
