Remove the bulb by pulling it
straight out of its metal tabs.
Push the new bulb into the metal
tabs. Snap the lens back in place.
Front individual map light:
Pry on the front edge in front of both
map lights.
Rear individual map light:
Pryontherearedgeofthelensin
the middle.
Tailgate light:
Pry on the upper edge to the left and
right of center.
Cargo area light:
Pry on the rear edge to the left and
right of center.
3.2.
CONTINUED
Lights
Maintenance
301
RREEAARR IINNDDIIVVIIDDUUAALL MMAAPP LLIIGGHHTT
CCAARRGGOO AARREEAA LLIIGGHHTT
01/09/07 12:43:29 31S3V610_306
To Next Page
Loading...
Need help?
General
