Remove the bracket from the
spare tire.
Keep turning the wheel nut
wrench to create slack in the cable.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Put the wheel nut wrench on the
hoist shaft. Turn the wrench
counterclockwise to lower the
spare tire to the ground.
11.
10.
8.
9.
CONTINUED
Changing a Flat Tire
Taking Care of the Unexpected
427
BRACKET
WHEEL NUT WRENCH
WHEEL NUT WRENCH
The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the hoist shaf t. Do not use any other
tool.
０７／０７／０９ １０：２０：１２ ３１ＳＴＸ６１０ ０４３２
To Next Page
Loading...
