CONTINUED
Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at each of the second
row seats.
To install a LATCH-compatible child
seat in either outer second row seat:
Move the seat belt buckle or
tongue away from the lower
anchors.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
When you install a child seat in rear
seating position, use the lower
anchors as shown in the illustration.
You can install up to three child
seats at a time with LATCH.
Do not attach two child seat
connectors to a single lower anchor
at a time.
The location of each lower anchor is
indicated by a small button above the
anchor point.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
1.
2.
Installing a Child Seat with
LATCH
Installing a Child Seat
Using the Outer LATCH
Driver and Passenger Safety
47
LOWER ANCHORS
MARKS
０７／０７／０９ ０９：２７：２６ ３１ＳＴＸ６１０ ００５２
To Next Page
Loading...
