Elapsed Time Reset
There are four elapsed time reset
choices you can make:
MANUAL ONLY － You can reset
the elapsed time, when Trip
Computer's Elapsed Time is
displayed (see page 79).
IGN OFF － The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A － The elapsed time is reset
when the Trip A is reset.
TRIP B － The elapsed time is reset
when the Trip B is reset.
You can choose this customize item
from ‘‘METER SETUP’’ by pressing
the INFO (▲/▼) button repeatedly.
Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO (▲/▼) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Information Display
94
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
To Next Page
Loading...
Need help?
General
