E n t e r i n g a D e s t i n a t i o n
N A V I G A T I O N ( T e c h / A d v a n c e P a c k a g e )
Real-time navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Press and release the Talk button before you give a command.
U s i n g V o i c e C o n t r o l
U s i n g t h e “ F i n d N e a r e s t ” C o m m a n d
Try these simple steps to find a nearby point of interest, such as a gas station,
movie theater, restaurant, etc.
Press and release the Talk button before you give a command.
1. Say “Find nearest ATM.”
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to
destination.
3. Say the number next to the
destination you want.
4. The system calculates the
route and displays the
“Calculate route to” screen.
Say “OK” to set the route.
* You can also use the Interface Dial to complete this procedure.
* You can also use the Interface Dial to complete this procedure.
Calculated Route
Distance to go
Direction of destination
Current vehicle
location
M a p S c r e e n
L e g e n d
1. Say “Display menu” and
“Address.”
2. Say “Street” followed by the
street name. Do not include
the direction (N, S, E, W) or
type (St., Ave., Blvd., etc.).
3. A list of street names appears.
Say the number next to the
street you want.
4. Say the entire street address
number. For example, “1-2-3-
4.”
5. If the street address is in more
than one city, a list of city
names appears. Say the num-
ber next to the city you want.
6. The system calculates the
route and displays the
“Calculate route to” screen.
Say “OK” to set the route.
2120
11 MDX ATG:ATG_NEW STYLE 7/21/2010 5:51 PM Page 12
To Next Page
Loading...
Need help?
General
