Acura MDX 2011 - Seat Belts

M a k i n g a C a l l
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Dial.”
3. Say the entire phone
number and “Dial” to
begin call.
4. The call is connected and
heard through the speakers.
R e c e i v i n g a C a l l
1. When you receive an incoming call, you hear a notification and see
one of the following pop-up messages.
3. Press the Hang-Up button
to end or decline the call.
2. Press the Pick-Up button to
accept the call.
Note: You can also use the Interface Dial to complete this procedure.
On the audio screen
On the navigation
map screen
On the Cellular
Phone screen
D i a l i n g a N u m b e r
Press and release the Talk button before you give a command.
Note: You can also use the Interface Dial to complete this procedure.
U s i n g S p e e d D i a l a n d V o i c e T a g s
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Phonebook.”
3. HFL imports your phonebook
if not already imported.
4. Once the phonebook
imports, say the number of
the entry you want to call.
Note: You can also use the Interface Dial to complete this procedure.
* Visit www.acura.com/handsfreelink to check if this feature is available on your phone.
U s i n g t h e I m p o r t e d P h o n e b o o k *
Note: See your owner’s manual for instructions on storing speed
dial entries and accompanying voice tags.
3. The call is connected and
heard through the
speakers.
2928
2a. Say “Call” and the number of
the entry. For example, “Call
one.” For the complete list of
speed dial entries, say “More
speed dial.”
2b. If a speed dial has a stored
voice tag, say “Call” and
the voice tag name. For
example, “Call Mary.”
1. Press the Pick-Up button to
access the Cellular Phone
screen.
11 MDX ATG:ATG_NEW STYLE 7/21/2010 5:53 PM Page 16