Message Condition Explanation
●
Appears when you attempt to change to another gear
position with the transmission in (P and the engine
OFF.
●
To select another gear position while in (P the engine
must be ON.
●
Appears when you try to change the gear position after
the position has automatically been changed to (P with
the driver’s door open and the driver’s seat belt
unfastened.
●
Press the park button If you leave the vehicle.
●
Appears when you change to (N, and press the
ENGINE START/STOP button within five seconds.
●
Appears when the vehicle is stopped with the driver’s
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.
●
The gear position remains in (N for 15 minutes, then
automatically switches to (P.
2 If you want to keep the transmission in (N
position [car wash mode] P. 351
●
Press the (P button before release the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 349
●
Appears when the engine stops without the
transmission in
(P, and does not restart automatically.
●
Appears if you open the hood while Auto Idle Stop
activates.
●
If you want to set the power mode to ON, change the
gear position to
(P.
●
If you want to start the engine, follow the normal
procedure.
2 Starting the Engine P. 340
To Next Page
Loading...
Need help?
General
