EasyManuals Logo

Acura MDX 2019 Service Bulletin

Acura MDX 2019
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
16. Check the Head-Up Warning (HUW) Indicator (If Equipped)
When you first turn the ignition to ON, the HUW indicator should blink and then go off.
17. Check Bluetooth
®
HandsFreeLink
®
(HFL)
To ensure HFL works and is ready to use, start the engine, then press and hold the Hang-up/Back button on the steering
wheel for 10 seconds. You should hear “The TCU is OK.” If you do not hear this message, see the service information
for troubleshooting information.
18. Check the Moonroof One-Touch Feature
Make sure the moonroof one-touch feature works properly:
When you firmly pull the moonroof switch back and release it, the moonroof should fully open.
When you firmly push the switch forward and release it, the moonroof should fully close.
When you push up on the switch and release it, the moonroof should tilt.
If the moonroof does not work properly, do the moonroof control unit reset procedure in the service information.
Page 11 of 13

Other manuals for Acura MDX 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acura MDX 2019 and is the answer not in the manual?

Acura MDX 2019 Specifications

General IconGeneral
BrandAcura
ModelMDX 2019
CategoryAutomobile
LanguageEnglish

Related product manuals