Open the hood.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Insert the new bulb into the
headlight housing and turn it one-
quarter turn clockwise to lock it in
place.
1.
2.
3.
4.
5.
6.
Lights
Maintenance
155
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
０４／０８／１２ １６：３６：５９ ３１ＳＷ０６４０ ０１５８
To Next Page
Loading...
Need help?
General
