Push the appropriate edge of the
adjustment switch to move the
mirrorright,left,up,ordown.
When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page ).
If you try to drive the vehicle without
releasing the parking brake, the ABS
indicator may come on, and the ABS
may not work properly.
44
3.
4.
Mirrors, Parking Brake
Parking Brake
72
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles.
０４／０８／１２ １６：２２：４８ ３１ＳＷ０６４０ ００７５
To Next Page
Loading...
Need help?
General
