Remove the cigarette lighter from
its socket and plug the power cord
end into the socket. Make sure the
key is in the ignition switch at
LOCK (0).
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by an
arrow molded into the underside
of the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch.
6. 7. 8.
Changing a Flat Tire
174
CIGARETTE LIGHTER
WHEEL NUTS JACKING POINT
POWER CORD
０４／０８／１２ １６：４０：２２ ３１ＳＷ０６４０ ０１７７
To Next Page
Loading...
Need help?
General
