88
uuIndicatorsu
*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
Indicator Name On/Blinking Explanation Message
*1
Immobilizer
System
Indicator
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks if the immobilizer system
cannot recognize the key
information.
• Blinks - You cannot start the engine. Set
the power mode to VEHICLE OFF
*1
, then
select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
Security System
Alarm Indicator
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks when the security system
alarm has been set.
2 Security System Alarm P. 173
—
20 ACURA RDX-31TJB6111.book 88 ページ 2020年2月11日 火曜日 午後2時6分