EasyManua.ls Logo

Acura RSX 2006 - How the SRS Indicator Works

Acura RSX 2006
258 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you see any of these indications,
the airbags and seat belt tensioners
may not work properly when you
need them.
If the side airbag off indicator comes
on (see page ), have the
passenger sit upright. Once the
passenger is out of the airbag’s
deployment path, the system will
turn the airbag back on, and the
indicator will go out.
There will be some delay between
the moment the passenger moves
into or out of the airbag deployment
pathandwhentheindicatorcomes
on or goes off.
A front seat passenger should not
use a cushion or other object as a
backrest. It may prevent the cutoff
system from working properly.
When you turn the ignition switch to
the ON (II) position, this indicator
comes on briefly then goes out. This
tells you the system is working
properly.
If the indicator comes on or
flashesonandoffwhileyoudrive.
If the indicator stays on after the
engine starts.
If the SRS indicator does not come
on after you turn the ignition
switch to the ON (II) position.
If the indicator comes on at any
other time, or does not come on at all,
you should have the system checked
by your dealer. For example:
The SRS indicator alerts
you to a potential problem
with your airbags, sensors, or seat
belt tensioners.
27
Additional Information About Your Airbags
How the SRS Indicator Works
26
Ignoring the SRS indicator can
result in serious injury or death
if the airbag systems or
tensioners do not work properly.
Have your vehicle checked by a
dealer as soon as possible if
the SRS indicator alerts you to
a possible problem.
05/06/16 08:55:15 31S6M640 0029 

Table of Contents

Related product manuals