Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Route the tether strap over the top
of the seat-back, making sure the
strap is not twisted.
Push and pull the child seat
forward and from side to side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Locate the appropriate anchor
cover, and pull it down and out
to expose the tether anchor.
4.
5.
7.
6.
8.
Installing a Child Seat
Driver and Passenger Safety
37
Flexible type
０５／０６／１６ ０８：５７：２３ ３１Ｓ６Ｍ６４０ ００４０
To Next Page
Loading...
