When your selection is successfully
entered, you will see the above
display for several seconds, and then
the display goes back to
‘‘CUSTOMIZE MENU.’’
If you fail to enter your selection,
you will see the above display for
several seconds, then the display
goes back to ‘‘CUSTOMIZE MENU.’’
Repeat the setup.
To exit ‘‘ELAP. TIME RESET
CONDITION,’’ press the INFO
button until you see ‘‘EXIT,’’ and
press the SEL/RESET button. The
display goes back to ‘‘CUSTOMIZE
MENU.’’
CONTINUED
Multi-Information Display
Instruments and Controls
101
０６／０９／０８ ２０：２７：３３ ３１ＳＥＡ６３０ ０１０６
To Next Page
Loading...
Need help?
General
