Driving and Operating 173
Use the brake pedal if emergency braking is
required.
To view and configure One-Pedal Driving, from
the infotainment display home screen, Select
Controls > Drive & Park > One-Pedal Driving.
Select Off to disable One-Pedal Driving for
traditional two-pedal driving, similar to a
gasoline vehicle.
Select On to enable One-Pedal Driving where a
moderate level of braking is applied when the
accelerator pedal is released while driving.
Select High to enable One-Pedal Driving where a
strong level of braking is applied when the
accelerator pedal is released while driving.
When enabled, One-Pedal Driving applies in
D(Drive). This feature remains enabled until
manually disabled by the driver. Press the
accelerator pedal to the desired speed. The
brake lamps will come on during substantial
deceleration and when the vehicle is stopped.
If One-Pedal Driving is turned off while stopped,
the vehicle will stay stopped. Press the brake
pedal or accelerator pedal to return to two-
pedal driving.
For faster access, One-Pedal Driving can be
toggled on the Driver Mode screen. From the
infotainment display home screen, select Drive
Mode to open the Drive Mode screen.
Touch W to toggle One-Pedal Driving on or off.
When turned on, One-Pedal Driving returns to
the previously selected level. To change the
level, press the Settings link in the pop-up box to
go to the full One-Pedal Driving selection.
When possible, One-Pedal Driving uses
regenerative braking to slow the vehicle for
energy efficiency. Friction brakes may be used
in some cases when regenerative braking is
reduced. Friction brakes will be used to hold the
vehicle after coming to a stop, and a noise may
be noticed when the brakes apply.
When driving on slippery roads, it is
recommended to turn off One-Pedal Driving.
See Winter Driving 0 162.
While using One-Pedal Driving, the Electric
Parking Brake may apply in some
circumstances. This can occur when:
• The driver exits the vehicle.
• The vehicle has remained stationary for five
minutes.
To resume driving, press the accelerator pedal,
and the Electric Parking Brake will
automatically disengage.
Drive Systems
All-Wheel Drive
This vehicle may be equipped with advanced
electric All-Wheel Drive (eAWD). The eAWD
system delivers power to all four wheels, and
the system adjusts automatically to the driving
conditions. The eAWD system continuously
varies the drive power to the front and rear
wheels to maximize driving efficiency and
improve driving dynamics. Your vehicle has
exceptional driving capability, but care must
always be taken to adjust driving style to the
traffic and road conditions.
The vehicle eAWD settings may be customized
for the driver mode selected. See Drive Mode
Control 0 179 for more information.
3BA_KAKC_3136T6000.book 173 ページ ２０２３年１２月２０日 水曜日 午後２時１０分
To Next Page
Loading...
