11
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Troubleshooting
Problem Possible Solution
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display indoors, side by
side and remove power adapter/batteries from
each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in outdoor sensor.
4. Reinstall power adapter/batteries in display.
5. Let the units sit within a couple feet of each other
for a few minutes to gain a strong connection.
Inaccurate forecast
• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the
display? Learning Mode must complete before
forecast and pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery
removal or resetting the display will restart Learning
Mode. After 14 days, forecast should be fairly
accurate, however Learning Mode calibrates for a
total of 33 days.
Inaccurate
temperature
or humidity
• Make sure both the display and sensor are placed out
of direct sunlight and away from any heat sources or
vents (see page 8).
• Make sure both units are positioned away from
moisture sources (see page 8).
The unit lost power
or batteries were
changed and the
time is not correct
• The Intelli-Time battery needs to be replaced
(see page 13). Once the new battery is installed,
time and date will need to be set manually.
To Next Page
Loading...