EasyManua.ls Logo

ACV HeatMaster 60 - User Manual

ACV HeatMaster 60
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HeatMaster® 60
Simple, Well Proven Performance
At the heart of the HeatMaster is a stainless steel
cylinder through which the flue tubes pass. This is
surrounded by a mild steel shell containing the
primary water.
The outer shell extends down to the combustion
chamber and around the flue tubes. The heat transfer
surface is therefore much greater than that of standard
direct fired water heater. A circulating pump fitted to
the primary circuit moves the water around the tank,
heating it faster and maintaining an even temperature
across the primary jacket.
The burner fires into the combustion chamber which
indirectly heats the stainless steel cylinder containing
the DHW. As with all Tank-in-Tanks, this is corrugated
over its full height and suspended in the HeatMaster
by its hot and cold water connections.
It is capable of operating at very high temperatures.
Key Benefits
Limescale build up is prevented because the:
- cylinder expands and contracts during use
- cold water does not come into contact with
the intense heat of the burner flame
No need for sacrificial anodes due to:
- scale resistant features
- corrosion resistance of stainless steel
The HeatMaster has one very major advantage over
other direct fired water heaters
- because it heats the DHW with a primary
circuit, this primary water can be used to
provide central heating as well
Most hot water and heating demands can be met -
simply by connecting two, three, four or more
HeatMasters together in a module.
The HeatMaster range can be used in conjunction
with SL and Jumbo hot water storage tanks –
supplying even the largest hot water requirement.
High performance, combined
direct fired boiler and water heater.
Can also be used as a stand alone
water heater.
High efficiency combination boilers
14
Combined temperature
and pressure gauge
Control
thermostat
Time clock
Manual reset high
limit thermostat
ON / OFF
switch
Summer /
Winter switch
I
O
Manual reset high
limit thermostat
Low water
pressure switch
Primary safety
valve
Control
thermostat
Thermal reset high
limit thermostat
Question and Answer IconNeed help?

Do you have a question about the ACV HeatMaster 60 and is the answer not in the manual?

Summary

Simple, Well Proven Performance

Key Benefits

Limescale Prevention

Prevents limescale buildup due to cylinder expansion and contraction during use.

No Sacrificial Anodes Needed

Due to scale-resistant features and stainless steel construction.

Primary Circuit for Central Heating

Primary circuit heats DHW, which can also be used to provide central heating.

Modular Heating Systems

Multiple units can be connected to meet higher hot water and heating demands.

Storage Tank Integration

Can be used with SL and Jumbo hot water storage tanks for large requirements.

Technical Data

Performance Data

Provides litres delivered in first 10 minutes/hour and continuous flow rates at various temperatures.

Characteristics and Dimensions

Details of internal components and physical dimensions of the unit.

ACV HeatMaster 60 Specifications

General IconGeneral
CategoryWater Heater
ManufacturerACV
ModelHeatMaster 60
Fuel TypeNatural Gas
Water Connection Size1 inch

Related product manuals