ACV HR 601 - User Manual

Explains the basic Tank in Tank heating principle and component functions.

Details the sequence of heating fluid circulation and sanitary water heating.

Describes the construction of the stainless steel internal and mild steel external tanks.

Details the polyurethane foam insulation and the stove-enamelled metal casing.

Covers the components mounted on the control panel, including thermostat and thermometer.

Provides specifications and application details for GL series tanks.

Provides specifications and application details for HR series tanks.

Provides specifications and application details for HR BE series tanks.

Provides specifications and application details for JUMBO series tanks.

Presents key technical specifications and performance parameters.

Presents peak and continuous output data for various tank models.

Explains coefficients used to adjust performance based on operating conditions.

Details the method for calculating heat loss from the appliance.

Guides users on selecting the appropriate tank size based on application type.

Provides formulas for calculating required tank size (N) for hotels, apartments, and sports centers.

Presents a chart for selecting tank models based on calculated building standards (N).

Illustrates primary heating fluid connections for single tank setups.

Shows primary heating fluid connections for battery configurations.

Details the connections for sanitary hot water flow and return.

Illustrates connections of tanks with HEAT MASTER sanitary water heaters.

Describes series connection for heat recovery and district heating systems.

Shows diagrams for sanitary water installation with and without mixing valves.

Explains the dual purpose of the secondary expansion tank for water hammer and pressure.

Provides step-by-step instructions for draining the sanitary water tank.

Details electrical wiring diagrams for HR-GL-JUMBO and HR BE models.

Illustrates the mounting of the 2.4 kW immersion heater.

Describes the BC 01 controller's function for sanitary hot water priority in winter.

Explains the BC 01 controller's function for hot water only in summer.

Advises setting the boiler thermostat at least 10°C higher than the tank temperature.

Details steps for attaching and joining the JUMBO tank base plates.

Covers applying rock wool insulation to the JUMBO tank body and top.

Describes securing the JUMBO casing panels and ensuring proper alignment.

Outlines the steps for filling, pressurizing, and purging the tank circuits.

Covers water pressure, purging, usage, and general maintenance checks.

Details the procedure for replacing the immersion heater.

Explains the scope and purpose of the product warranty.

Lists exclusions and limitations applicable to the warranty coverage.

Provides detailed technical specifications for various HR, GL, and JUMBO tank models.

Lists the safety and compliance certifications obtained for the products.

Lists spare parts codes and descriptions for HR and HR BE models.

Lists spare parts codes and descriptions for GL and JUMBO models.

Explains the basic Tank in Tank heating principle and component functions.

Details the sequence of heating fluid circulation and sanitary water heating.

Describes the construction of the stainless steel internal and mild steel external tanks.

Details the polyurethane foam insulation and the stove-enamelled metal casing.

Covers the components mounted on the control panel, including thermostat and thermometer.

Provides specifications and application details for GL series tanks.

Provides specifications and application details for HR series tanks.

Provides specifications and application details for HR BE series tanks.

Provides specifications and application details for JUMBO series tanks.

Presents key technical specifications and performance parameters.

Presents peak and continuous output data for various tank models.

Explains coefficients used to adjust performance based on operating conditions.

Details the method for calculating heat loss from the appliance.

Guides users on selecting the appropriate tank size based on application type.

Provides formulas for calculating required tank size (N) for hotels, apartments, and sports centers.

Presents a chart for selecting tank models based on calculated building standards (N).

Illustrates primary heating fluid connections for single tank setups.

Shows primary heating fluid connections for battery configurations.

Details the connections for sanitary hot water flow and return.

Illustrates connections of tanks with HEAT MASTER sanitary water heaters.

Describes series connection for heat recovery and district heating systems.

Shows diagrams for sanitary water installation with and without mixing valves.

Explains the dual purpose of the secondary expansion tank for water hammer and pressure.

Provides step-by-step instructions for draining the sanitary water tank.

Details electrical wiring diagrams for HR-GL-JUMBO and HR BE models.

Illustrates the mounting of the 2.4 kW immersion heater.

Describes the BC 01 controller's function for sanitary hot water priority in winter.

Explains the BC 01 controller's function for hot water only in summer.

Advises setting the boiler thermostat at least 10°C higher than the tank temperature.

Details steps for attaching and joining the JUMBO tank base plates.

Covers applying rock wool insulation to the JUMBO tank body and top.

Describes securing the JUMBO casing panels and ensuring proper alignment.

Outlines the steps for filling, pressurizing, and purging the tank circuits.

Covers water pressure, purging, usage, and general maintenance checks.

Details the procedure for replacing the immersion heater.

Explains the scope and purpose of the product warranty.

Lists exclusions and limitations applicable to the warranty coverage.

Provides detailed technical specifications for various HR, GL, and JUMBO tank models.

Lists the safety and compliance certifications obtained for the products.

Lists spare parts codes and descriptions for HR and HR BE models.

Lists spare parts codes and descriptions for GL and JUMBO models.