Need help?Do you have a question about the Aczet MB 50 and is the answer not in the manual?
General| Capacity | 50g |
|---|---|
| Linearity | ±0.002g |
| Weighing Pan Size | 90mm |
| Heating Element | Halogen |
| Temperature Setting | 1°C increments |
| Display | LCD |
| Interface | RS232 |
| Power Supply | 230V, 50Hz |
| Resolution | 0.01% |
| Storage Temperature | 0°C to 50°C |
| Readability | 0.001g |
| Repeatability (Std. Dev.) | 0.001g |
| Temperature Range | 50 °C to 160 °C |
| Moisture Range | 0 - 100% |
| Measurement Range | 0 to 100% |
Explains the thermogravimetric principle and how moisture analyzers work.
Guidelines for handling, shipping, unpacking, and storing the moisture analyzer.
Recommendations for choosing an optimal location for the analyzer.
Steps to ensure the analyzer is precisely horizontal for accurate measurements.
Facilitates weight and temperature calibration for accurate measurements.
Stores results based on the selected method, typically last 25 samples.
Stores results in batches, offering flexibility and capacity up to 1000 data points.
Configures conditions like auto start, stability check, and delay for starting analysis.
Details various heating profiles (Standard, Gentle, Rapid, Step, High Temp).
Defines automatic, manual, timed, and user-defined conditions for ending heating.
Guides on performing standard, user, and test calibrations for weight accuracy.
Details procedures for calibrating temperature points using an external sensor.
To Next Page
