Aczet MB 50 - Safety And Warning

qDo not use a sample that could make
a dangerous chemical reaction and
cause an explosion or poisonous gas,
when the sample is heated.
qKeep flammables away from the
analyzer.
qDo not use the analyzer in ambient
ignitable gas. It may cause explosion
and fire.
qUse a power source (voltage,
frequency, outlet type) adapted to
the specification of the analyzer. If
excessive voltage is used, the
analyzer may overheat and be
damage or cause a fire.
qTurn off the power switch and remove
the power cord from the socket,
when replacing the halogen lamp.
Touching the halogen lamp connector
carelessly may cause an electric
shock.
qDo not disassemble the analyzer. It
may cause an error, damage,
receiving an electric shock or fire. If
the analyzer needs service or repair,
contact the local aczet service
center.
qAvoid getting the analyzer wet. It is
not a water-resistant analyzer. If
there is leakage of liquid into the
analyzer, it may cause damage to the
analyzer or receiving electric shock.
qDo not look at the active halogen
lamp to protect your eyes from
damage.
qDo not drop, hit or crack the
glassware including the halogen
lamp, to avoid any injury.
qWhen the halogen lamp is used
beyond 3000 hours, we recommend
replacing the lamp with a new one to
avoid trouble.
qWhen discarding a halogen lamp, do
not break it to avoid scattering glass
and injury.
CAUTION
qDo not touch the heater cover, the
halogen lamp, glass-housing, pan
handle, sample pan and sample
without adequate protection, it
could cause a burn or scar.
qParts of the analyzer are very hot
when a measurement finishes. For
operation, use the specified grips of
the heater cover and pan handle. Use
the standard accessory tools.
qWhen the analyzer is used in a room
where hot air does not diffuse, it
may unexpectedly overheat. In this
case, adjust the drying temperature
or move the analyzer to a place with
adequate ventilation.
qAvoid leaving the analyzer in direct
sunlight, as that could cause
discoloration of the case or a
malfunction.
qUse only aczet accessories as they
are optimally designed for use with
your moisture analyzer
Safety And Warning :
5