Adam Equipment CKT 16 - User Manual

© Adam
Equipment Company 2020
AdamEquipment
Cruiser(CKT&CKT‐M)
SERIES
Adam
Equipment strives to be more environmentally focused and uses recycled materials and environmentally
friendly packaging where possible. As part of this initiative we have developed a short form manual that uses
less paper and ink to describe the main functions of your new Adam scale. A complete version is available at
www.adamequipment.com. Thank you for your support of Adam Equipment and we hope that you enjoy your
new scale.

Summary

3.0 Operation

3.1 Setting Up and Turn On the Scale

Instructions for initial setup and powering on the scale.

4.0 Internal Components

4.1 Opening the Scale

Procedure to open the scale by unscrewing designated points.

4.2 Scale Components

Identification of internal scale components with a diagram and labels.

5.0 Replacing the Load Cell

6.0 Replacing the Display

6.1 Module Option Covers; Boards

Description of module option boards and covers located beneath the scale for protection.

7.0 Replacing the PCB

8.0 Calibration; Linearity Settings

9.0 Factory Parameters

9.1 A;D Count

Allows viewing A/D counts from the internal converter, useful for service.

9.2 Reset

9.3 C-Con

9.4 Dot

9.5 M-Tare

9.6 G1 and G2

9.7 Filter

9.8 P-Zero

9.9 K-Zero

9.10 Auto; Zero Tracking

9.11 Capacity

9.12 Count Unit

9.13 Dual

9.14 Linear Calibration

10.0 Service Information

Warranty Information

Adam Equipment CKT 16 Specifications

General

Capacity	16 kg
Display	LCD
Calibration	External calibration
Auto Power Off	Yes
Units of Measurement	g, kg, lb, oz
Tare Range	Full capacity
Power Supply	AC adapter or battery