Adam Equipment CKT 32

To Next Page

Equipment Company 2020

AdamEquipment

Cruiser(CKT&CKT‐M)

SERIES

Adam

Equipment strives to be more environmentally focused and uses recycled materials and environmentally

friendly packaging where possible. As part of this initiative we have developed a short form manual that uses

less paper and ink to describe the main functions of your new Adam scale. A complete version is available at

www.adamequipment.com. Thank you for your support of Adam Equipment and we hope that you enjoy your

new scale.

Need help?

Do you have a question about the Adam Equipment CKT 32 and is the answer not in the manual?

Summary

Specifications

Other Specifications

Units of measure, interface, stabilisation time, operating temperature, power supply, battery, calibration, display, and scale housing.

Operation

Setting Up and Turn On the Scale

Follow this set up when using the scale for first time: Place, level, attach power cable, plug in, press power button, self-test.

Internal Components

Opening the Scale

The scale can be opened by unscrewing the 5 designated points located beneath the scale.

Scale Components

Identifies key components of the scale, including PCB, Keypad, Display, Load cell, and power cable.

Replacing the Load Cell

Replacing the Display

Replacing the PCB

Calibration and Linearity Settings

Factory Parameters

Reset

Resets count values and returns to the PARAMETER menu.

FILTER

P-ZERO (Power Zero)

K-ZERO (Key Zero)

Auto; Zero Tracking

CAPACITY

Linear Calibration

Service Information