Need help?Do you have a question about the Adam Equipment CPWplus 6 and is the answer not in the manual?
Lists the items included in the scale package for initial setup.
Explains how to connect the scale indicator to the base.
Describes the three methods for mounting the scale indicator.
Details how to set up the scale with a pillar.
Instructions for installing batteries for power supply.
Describes the function of each key on the scale's keypad.
Explains the meaning of various symbols shown on the scale's display.
Instructions on how to turn the scale on and initial display sequence.
Details the process of zeroing the scale, including auto zero tracking.
Explains how to use the tare function to zero out container weights.
Steps for placing items on the scale and obtaining weight readings.
How to choose the desired weighing units (kg, lb, oz).
Explains how the print/hold key functions based on user settings.
Configures the automatic power-off function for battery saving.
Adjusts the backlight settings for the scale display.
Selects which weighing units are available for use.
Sets the unique ID for RS-232 communication.
Sets the baud rate for RS-232 data transmission speed.
Configures serial communication bit rate and parity settings.
Chooses the data transmission method (e.g., continuous, on-demand).
Configures how the hold function operates (automatic, manual).
Sets the duration for which the weight display is held.
Adjusts display filtering for stable readings in different environments.
Sets the range for automatic zero adjustment after removing weight.
Configures the sensitivity of the stability indicator.
Sets the range for maintaining scale stability after a reading.
General| Brand | Adam Equipment |
|---|---|
| Model | CPWplus 6 |
| Category | Scales |
| Language | English |
To Next Page