Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SCP710B - SUPER CLAMP
Universal Hook Clamp black
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans
-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Perfect for lighting and multimedia applications
Adjustable clamping lever - can be operated in any position
Full metal (stainless steel and die-cast aluminium alloy)
For mounting on round and square tubes
Clamping Range: 13 - 55 mm
5/8“ (16 mm) hexagonal reception for spigots
1 x ¼“ thread and 2 x M5 thread
Max. Load Capacity: 20 kg
Not oxidising
Various mounting bolts are optionally available
OPERATION
A
Use this ratchet handle to secure the clamp onto the bar or fixture. Tighten well for secure grip. The ratchet
handle allows you to reposition it should you not have clearance to rotate the handle in a complete circle to
tighten or loosen it. To reposition the handle position simply pull it out and reposition it.
D
Use this socket to insert 5/8” (16mm) hexagonal or round spigots.
C
Be sure to push in the locking pin (C) on the side while inserting spigots to make sure the spigot is
completely inserted. Once pin C is released, the spigot should be securely held and should not slip out of the
socket. To release the spigot, the locking pin must be pressed.
B
Once the spigot is in place, be sure to tighten the fastening screw in order to safely secure the spigot.
E
1x ¼” thread for mounting accessories or cameras
F
2x M5 Thread for additional mounting options for accessories
G
Optionally available accessory wedge for mounting the clamp on flat surfaces. The pictures show the wedge
in storage/transport position. It can be released from here and placed in the V-shaped jaw of the clamp in
order to create a flat surface.
SPECIFICATIONS
Model number: SCP710B
Product type: Universal clamp
Material: die-cast aluminium
Surface: powder coated
Colour: black
Suitable for tube diameter: 13 - 55 mm
Weight: 0,5 kg
A
B
C
D
EF F
G
To Next Page
Need help?
General
