Adam PMB User Manual

Adam Equipment – Scales and Balances UK USA South Africa
Registered No: 1309669 (England)
PMB TEMPERATURE CALIBRATION KIT
Part Number 3.07.6.6.10650, Revision E, Feb 2015
PMB TEMPERATURE CALIBRATION KIT
The temperature probe Serial No. AE xxxxx included in this kit has been calibrated to
an accuracy of +/- 1ºC
The Temperature measuring range is from -50ºC to 300ºC
Display resolution is 0.1ºC
Power is 1.5v DC LR44 button-cell type battery
Operating Instructions
ON/OFF: Press this button to power the probe up and down
ºC/ºF: Press this button to alternate between ºC and ºF
Temperature Calibration
1. Place a sample pan on the pan support during this test.
2. Place the temperature probe to be used to monitor the temperature within the
weighing chamber on or near the sample pan.
Adam Equipment

Adam PMB Specifications

General

Category	Temperature Controller
Input Type	Thermocouple, RTD
Output Type	Relay
Control Algorithm	PID
Display	LED
Communication Interface	RS-485
Power Supply	100-240 VAC
Operating Temperature	0°C to 50°C

Summary

PMB Temperature Calibration Kit

Operating Instructions

Instructions for powering the probe on/off and switching between Celsius and Fahrenheit.

Temperature Calibration Procedure

Detailed steps for preparing the probe and pan for heating chamber temperature calibration.

External Temperature Probe Troubleshooting

Troubleshooting Probe Display Errors

Steps to resolve LL.L or H.HH errors or if the probe does not turn on.

Warranty Information

Warranty Statement Details

Covers limited warranty for parts and labour, claims process, and exclusions.

Regulatory Compliance Statements

WEEE Disposal Compliance

Information on the proper disposal of the device according to WEEE directive.

FCC/IC EMC Verification Statement

Statement regarding compliance with FCC and IC regulations for digital devices.