11
MANUAL BACKUP
(CONTINUED)
4) Now we will move TILT motor using the inner hole and turning our ¼ inch hex tool (ratchet) COUNTER CLOCKWISE. Tilt
the seat down until it is just touching the steering wheel by turning the tool COUNTER CLOCKWISE.
5) We now return to the PIVOT motor and turn CLOCKWISE until the seatback has just cleared the steering wheel.
6) Next, we move the TILT motor until the seat becomes completely level. Use the inner hole and turn COUNTER CLOCKWISE
until the seat is parallel with the floor of the vehicle.
7) Our last step is to PIVOT until the seat is completely inside the vehicle. Turn the PIVOT tool CLOCKWISE until the seat is
returned to its original position in the vehicle.
To Next Page
Loading...