To Next PageTo Next Page
Need help?Do you have a question about the Adata XPG INVADER and is the answer not in the manual?
General| Model | XPG INVADER |
|---|---|
| Type | Mid Tower |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Cooling Support Front | 3x 120mm or 2x 140mm |
| Cooling Support Top | 2x 120mm or 2x 140mm |
| Cooling Support Rear | 1x 120mm |
| Radiator Support Front | Up to 360mm |
| Radiator Support Top | Up to 240mm |
| Radiator Support Rear | Up to 120mm |
| GPU Clearance | 400mm |
| CPU Cooler Clearance | 170mm |
| PSU Support | ATX |
| Pre-installed Fans Front | 1x 120mm |
| Pre-installed Fans Rear | 1x 120mm |
| Fan Support Front | 3x 120mm or 2x 140mm |
| Fan Support Top | 2x 120mm or 2x 140mm |
| Color | Black |
| Material | Steel |
| Drive Bays | 2 x 2.5", 2 x 3.5" |
| Front Ports | 2 x USB 3.0, Audio In/Out |
Lists and quantifies all included accessories and screws.
Details the function of buttons and ports on the front panel.
Instructions for removing the tempered glass side panel and front bezel.
Steps for installing 2.5" drives into the chassis mounts.
Steps for installing 3.5" drives using the provided brackets.
Guides for mounting the power supply unit and rear fans.
Instructions for installing front and side 120mm fans.
Steps for installing expansion cards into PCI-E slots.
Explains how to connect RGB lighting and USB headers.
Provides dimensions, form factor, material, and clearance limits.
Details the warranty duration and limitations.
Information on how to access online support and FAQs.
