Need help?Do you have a question about the ADB Safegate EREL and is the answer not in the manual?
General safety instructions for installing and using ADB SAFEGATE equipment.
HAZARD icons used in the manual and their meanings for safety.
Definition and responsibilities of qualified personnel for operating the equipment.
Dangers related to hazardous voltages, arc flash, and electric shock during operation.
Safety precautions and general procedures for installing the fixture.
Reinforces the intended use of the equipment and warns against misuse.
Step-by-step instructions for connecting the fixture to the transformer and mounting support.
Procedure for leveling and aligning the fixture using spirit levels and alignment tool.
Critical safety rules to follow during all maintenance operations.
Defines frequency and tasks for routine preventive maintenance.
General guidelines and precautions for replacing parts of the fixture.
Procedure for removing and replacing the complete optical head assembly.
Procedure for repairing a faulty light, including replacing optical kits and fuse resistors.
Procedure for testing the fixture's operation with a constant current regulator.
Safety warnings related to improper operation and potential equipment damage.
A guide to diagnose and resolve common fixture problems.
General| Light Source | LED |
|---|---|
| Ingress Protection | IP67 |
| Voltage | 120-240 VAC |
| Power | 22 W (typical) |
| IP Rating | IP67 |
To Next Page
