112
V. Dryer will not tilt...
1. Tilt to unload -- 1-- door...
a) Dryer
will not tilt unless the front doors are completely open ...
1) No door open signal.
2) Defective proximity switch.
3) No (external) compressed air to pneumatic switches... 80 psi required (11 cf/hr).
2. Tilting to unload -- 2-doors ...
a) Dryer will not tilt to unload unless the front doors are closed.
3. Lint drawer is open.
W. Dryer will not level from a tilt position...
1. Lint drawer is open.
2. Defective lint drawer switch.
3. Broken connection between the lint drawer switch and the lint drawer closed relay.
4. Defective pneumatic valve.
To Next Page
Loading...
