To Next PageTo Next Page
Need help?Do you have a question about the ADC AD-170SE and is the answer not in the manual?
General| Load Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Heat Source | Electric |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power Consumption | 2700 W |
| Dimensions (H x W x D) | 850 x 600 x 585 mm |
Detailed steps for responding to a gas leak, including evacuation and contacting emergency services.
Mandates that installation and servicing must be performed by qualified and certified personnel.
Emphasizes disconnecting power and lockout before maintenance and warns against tampering with safety devices.
Covers rules on unattended operation, child supervision, and prohibited drying materials to prevent hazards.
Prohibits operating the dryer with panels removed or without the lint filter, and specifies environmental conditions.
Covers electrical grounding, avoiding disabling safety circuits, and operating within load capacity for safety.
Detailed step-by-step guide for responding to a gas odor, including evacuation and contacting authorities.
Warns against drying specific materials or using the dryer in hazardous environments to prevent fire or explosion.
Specifies essential criteria for dryer placement, including floor stability, environmental conditions, and clearances.
Provides step-by-step instructions for removing packaging, handling, leveling, and reconnecting drive belts.
Specifies minimum clearances required around the dryer for enclosures, walls, ceilings, and fire sprinkler systems.
Explains the critical need for adequate fresh air supply and details the required airflow and opening sizes.
Covers general exhaust ductwork installation, including material, length, elbows, and inspection requirements.
Details specifications for single dryer venting, minimum duct sizes, and exhaust back pressure limitations.
Outlines requirements for common ducting for multiple dryers, including capacity and duct sizing tables.
Details mandatory electrical installation standards, code compliance, and the prohibition of aluminum wiring.
Details the necessity and methods for proper grounding of the dryer for safety and electronic component function.
A comprehensive checklist of items to verify before attempting to operate the dryer for the first time.
Details essential tests and checks to perform before the dryer is put into regular use.
Covers gas pressure testing, safety circuit checks, load requirements, and microprocessor timing adjustments.
Outlines the necessary requirements for installing the S.A.F.E. system, including water supply and protection from freezing.
