How to fix ADC Proscope 5212 with no light output?
If your ADC Medical Equipment has no light output, the possible causes are: * The lamp might be burned out or is the wrong lamp. Replace the lamp with ADC part #5211-4. * The batteries might be depleted. Replace them with fresh “C” batteries.
What to do if ADC Proscope 5212 Medical Equipment has dim light output?
If the light output of your ADC Medical Equipment is dim, it could be due to the lamp nearing the end of its life, in which case you should replace the lamp with ADC part #5210-4. Alternatively, the batteries may be depleted, so replace them with fresh “C” batteries.
What to do if accessories do not attach securely to ADC Proscope 5212?
If the accessories do not attach securely or operate properly with your ADC Medical Equipment, the accessories may have reached the end of their useful life. Obtain replacement accessories.
What to do if ADC Proscope 5212 Medical Equipment instrument head will not connect?
If the instrument head of your ADC Medical Equipment will not connect, it could be that the thread/connection is damaged. Service is required.
Why is the spot not centered on my ADC Medical Equipment?
If the spot is not centered on your ADC Medical Equipment, the aperture dial may not be centered. Move the aperture dial to the full detent position.
What to do if there is visible corrosion on ADC Medical Equipment?
If you notice visible corrosion on your ADC Medical Equipment, it is likely due to damage from excessive moisture. Service is required.
General| Brand | ADC |
|---|---|
| Model | Proscope 5212 |
| Category | Medical Equipment |
| Language | English |
To Next Page
