EasyManua.ls Logo

ADC Proscope 5212 - Page 4

ADC Proscope 5212
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
WARNING: When replacing lamp, allow lamp to cool for five minutes before han-
dling.
WARNING: When cleaning/disinfecting devices that have been used on patients, be
sure to use appropriate personal protective equipment and follow all safety precau-
tions/warnings.
CAUTION: Consult the cleaning and disinfection instructions for each part for further
information about cleaning and disinfecting this product. Always remove batteries
prior to cleaning or disinfecting any device.
WARNING: No form of sterilization has been validated for this device or its corre-
sponding components and sterilization may compromise the safety and effectiveness
of this device. (This includes steam sterilization.)
WARNING: Use of any accessories or materials not indicated in the user's manual
can degrade the minimum safety of the equipment.
CAUTION: Federal law restricts this device to sale by or on the order of a physician or
licensed health care practitioner.
WARNING: During use metal components near instrument head can become warm.
This is especially true if device is on for extended periods of time. Do not leave device
on when not in use.
Otoscope
This instruction manual is for use with the Complete 2.5v Instrument Set (Item #5215),
2.5v Diagnostic Set (Item #5210), 2.5v Otoscope (Item #5211 or 5211V), and all ac-
cessories and replacement parts.
Battery Handle: (Item #5211-5) All instrument sets come equipped with a "C" cell
knurled chrome handle with rheostatic power switch.

Related product manuals