ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-201
© 2000, ADC Telecommunications, Inc.
DLP-564
Page 1 of 1
CRAFT INTERFACE SYSTEM LOGOFF
Summary:
This procedure provides instructions for logging off the Craft Interface system.
1. Press CONTROL-D to log off.
Note:
You will be logged off automatically if a period of keyboard inactivity exceeds a
threshold (default is 30 minutes). You can change this threshold at the Serial Port
Configuration menu. The change will take effect the next time you log on the Craft
Interface.
2. If you are using a terminal, turn the power off. If using a host computer, exit the
communications software, then turn the power off.
Stop! You have completed this procedure.
To Next Page