ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-11
© 2000, ADC Telecommunications, Inc.
NTP-002
Page 3 of 3
Do Items Below in the Order Listed For Details Go To
Note:
For information about installing and testing the Remote Test Access Unit
(RTAU), which is used with MPU Software Version 5.3, refer to the Soneplex RTAU
(Remote Test Access Unit) Installation Instructions manual, listed under Related
Publications at the beginning of this manual.
18. Install and test the Streaker (STK) module (if present). DLP-571
19. Complete assignment forms and update office records as required by
local procedures. DLP-523
20. Close the chassis front cover when installation of modules is
complete. The chassis may remain powered up unless otherwise
directed in the work order.
To Next Page
Loading...