ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-18
© 2000, ADC Telecommunications, Inc.
NTP-006
Page 1 of 1
ALARMS PROCEDURES
Summary:
The following procedures can be used to display alarms and locate trouble in a
Soneplex system using the Craft Interface device. They may be performed in any order.
Do Items Below As Required For Details Go To
Active Alarms Display DLP-542
Alarm History Clearance Command DLP-527
Alarm History Display DLP-544
Alarm Summary Display DLP-543
To Next Page
Loading...