To Next PageTo Next Page
Need help?Do you have a question about the Adcom GFA-5400 and is the answer not in the manual?
General| Impedance | 8 Ω |
|---|---|
| Audio output channels | 2.0 channels |
| Connectivity technology | Wired |
| Power requirements | 115 V, 50-60 Hz |
| Power consumption (typical) | 960 W |
| Product color | Black |
Describes differences between GFA-5400 amplifier versions 1 and 2, focusing on protection circuits.
Lists general test conditions and requirements for amplifier service procedures, including voltage and load.
Outlines critical steps for bias alignment and DC offset check before adjustments for amplifier performance.
Lists components for the ADCOM GFA-5400 Power Supply PCB, including capacitors and resistors.
Lists components for the ADCOM GFA-5400 Amplifier PCB, detailing capacitors, diodes, and transistors.
Lists general hardware components for the ADCOM GFA-5400, such as chassis parts and connectors.
Lists components for the ADCOM GFA-5400 Protection Circuit Power Supply PCB.
Details power output ratings into 8 and 4 ohms and associated Total Harmonic Distortion (THD) limits.
Specifies frequency response at 1 Watt and power bandwidth for the GFA-5400 amplifier.
Provides specifications for signal-to-noise ratio and amplifier gain.
Details input sensitivity requirements and input impedance of the GFA-5400 amplifier.
Lists power consumption figures and physical dimensions of the GFA-5400 amplifier.
