Need help?Do you have a question about the Adcom GFA-6000 and is the answer not in the manual?
Connect control center outputs to amplifier inputs via RCA or ADlink connectors.
Discusses level controls and recommendations for interconnect cables.
Details connecting speakers using binding posts and proper phasing.
Explains red/black terminals and how to identify speaker wire conductors.
Advises on appropriate wire gauge based on speaker distance for optimal sound.
Details connecting wires/plugs to binding posts for optimal contact.
Describes the purpose and usage of level controls for channel trims.
Instructions for safely powering on the unit and system.
Indicates non-linear distortion or clipping, warning of potential overload.
Lights when heat sinks exceed 85°C, automatically disconnecting channels.
Location, purpose, and replacement value for the AC line fuse.
Role of internal fuses and when they might blow.
Details continuous average power output for front and rear channels at various impedances.
Specifies IM distortion levels for SMPTE and CCIF methods across different power levels.
Outlines frequency response and power bandwidth of the amplifier.
Provides figures for dynamic headroom and weighted signal-to-noise ratio.
Specifies amplifier's damping factor and rise time characteristics.
Details power usage, dimensions, and weight of the unit.
To Next Page
General
