EasyManua.ls Logo

Adcom GTP-500 User Manual

Adcom GTP-500
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Adcom GTP-500 and is the answer not in the manual?

Adcom GTP-500 Specifications

General IconGeneral
Frequency Response10Hz to 100kHz ±0.5dB
Total Harmonic Distortion0.005%
Input Sensitivity2.5mV (MM), 200mV (line)
Signal to Noise Ratio80dB (MM), 95dB (line)
Dimensions432 x 83 x 343mm
Weight6.8kg
TypePreamplifier/Tuner
FM Tuning Range87.5-108 MHz

Summary

Warning and Safety Precautions

General Safety Precautions

Read and follow all instructions, heed warnings, and avoid water/heat.

Electrical Safety

Connect to AC only, protect cord, ensure proper grounding.

Usage and Maintenance

Proper ventilation, cleaning, and unplugging during non-use.

Service and Damage

Handle damage, liquid entry, and servicing by qualified personnel.

Welcome and Initial Setup

Product Overview

Introduction to the GTP-500's advanced design and features.

Unpacking and Inspection

Inspect the GTP-500 for damage upon unpacking and save materials.

Installation Location

Ensure proper ventilation and placement for optimal performance.

Rear Panel Connections and Wiring

Overview of Rear Connections

Diagram of rear panel and explanation of input/output signal connections.

Antenna Connections

Details for connecting AM and FM antennas, including types and setup.

Phono Input and Grounding

Connecting turntable phono input and ground wire for hum reduction.

Input/Output and Connectivity

Audio Input Handling

Phono, CD, and Tape inputs and their connections.

Output Options

Main outputs (LAB/NORM) for amplifier connection.

Power and Remote Control

AC power connection, accessory outlets, fuse, and remote sensor setup.

Accessory Power and Controls

Accessory Outlet Usage

Power limits and guidelines for accessory outlets.

Front Panel Controls

Overview of front panel controls.

Power and Headphone Jack

Controls for power and headphone connection.

Channel and Tone Adjustment

Balance, Bass, and Treble controls for audio adjustment.

Tone and Filter Controls

Bass, Treble, and Tone Enable

Controls for adjusting low and high frequencies.

Contour and Filters

Features for loudness compensation and frequency filtering.

Mono and Selector Functions

Mono playback and independent recording/listening source selection.

Tuning and Playback Controls

Volume and Sensor

Adjusting volume and receiving remote signals.

Tuning and Station Memory

Tuning modes, frequency selection, and storing stations.

Display and Band Selection

Information display and AM/FM band switching.

Mute and Blend Options

Muting and Hi Blend circuit functionality.

Remote Control Operation

Remote Transmitter Overview

Using the RC-500 remote transmitter and its window.

Remote Control Functions

Power, memory, tuning, volume, band, and listening selection via remote.

Care, Troubleshooting, and Warranty

Unit Care and Cleaning

Guidelines for cleaning the front panel and avoiding abrasive cleaners.

Fuse and Power Issues

Checking and replacing the AC line fuse for power issues.

Technical Support and Service

Contacting ADCOM for questions, service, or returns.

Warranty Information

Details on the ADCOM Limited Warranty for the USA.

Antenna Grounding

Outdoor Antenna Grounding

Grounding an outdoor antenna system for protection against surges.

Grounding Example Diagram

Diagram illustrating antenna grounding as per National Electrical Code.

Specifications

FM Tuner Specifications

Detailed performance specifications for the FM tuner section.

Preamplifier Specifications

Detailed performance specifications for the preamplifier section.

Amplifier Specifications

Performance specifications for ADCOM amplifiers (GFA-555, GFA-545, GFA-535).

Dimensions and Accessories

Physical dimensions, weight, and optional accessories like rack mounts.

Related product manuals