Need help?Do you have a question about the Adcom GTP-550 and is the answer not in the manual?
Diagram illustrating the front panel controls and their labels.
Connecting external audio sources to the unit.
Connecting video sources to the unit.
Connecting the preamp outputs to power amplifiers.
Connecting a subwoofer to the unit.
How to select sources and perform recording/dubbing.
Using the AM/FM tuner, display indicators, and tuning methods.
Balances speaker levels for accurate audio playback.
Selects operating modes and rear channel delay settings.
General| Channels | 2 |
|---|---|
| Total Harmonic Distortion (THD) | 0.005% |
| Input sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100dB |
| Inputs | Phono, CD, Aux |
| Outputs | tape 1, tape 2 |
| Signal to noise ratio | > 100 dB |
To Next Page
