WARNINGS
• Do not touch any hot surfaces
• Do not plug or unplug unit with wet hands
• Do not immerse unit, cord or plug in liquid at any time
• Unplug cord from outlet when not in use and before cleaning
• Do not operate unattended
• Do not use this unit for anything other than intended use
• Do not use outdoors
• Operate the unit with legs provided to prevent overheating of surfaces below
• Do not use if unit has a damaged cord or plug, in the event the appliance
malfunctions, or has been damaged in any manner
• Keep children and animals away from unit
• Any incorrect installation, alterations, adjustments and/or improper maintenance
can lead to property loss and injury. All repairs should be done by authorized
professionals only
• Ensure that the designated power supply is adequate for continual usage and the
voltage is correct
ASSEMBLY - NOTE – Legs and under‐shelf must be assembled before securing legs to the table.
Standard Adjustable Under-shelf
1.
Remove the unit from the shipping carton and packaging.
2. Inspect the contents to ensure there is no damage to the unit.
3.
Rest table on its top with gussets facing up. (Use cardboard or other material to prevent scratching top)
4. Install legs into gussets.
5. Align under‐shelf gussets with legs and slide under‐shelf down legs to desired position. (DO NOT
force or beat corners as damage could occur)
6. Tighten set screws in under‐shelf gussets to secure under‐shelf and install feet into legs using a rubber
mallet.
7. Tighten set screws in gussets to secure legs to table.
8. Place table on back with control knobs up.
9. See cutting board mounting instructions below.
To Next Page
Loading...
