ADDER AdderLink XDIP Quick Start Guide

Welcome
Thank you for choosing the AdderLink XDIP extenders. These exible modules (nodes) can be
congured either as transmitters or receivers and then mixed in a variety of combinations to suit.
AdderLink XDIP
Quick Start
Choosing a channel...
From your receiver, you can switch between a locally connected computer (if present) and any number
of linked transmitters in two main ways:
...using the channel list
The channel list shows all of your switching
options:
1 If the channel list is not already displayed,
press and hold the CTRL and ALT keys and
then press C
Ü
2 Click on the required channel (or use the
up/down arrow keys and Enter) to connect.
Receiver 1
Description
Name
Local Computer
Transmitter 1
Transmitter 2
Description
Description
Description
Description
#
0
1
2
3
4
5
6
7
8
...using hotkeys
Hotkeys offer the quickest way to switch between channels:
1 Press and hold the CTRL and ALT keys and then press the number for the required channel, e.g. 0
for the locally connected computer, 1 for the rst transmitter in the list, 2 for the second, etc.
Changing the hotkeys
You can change the default hotkeys
to suit your installation:
1 Display the channel list and then
click the icon. Enter the admin
password.
2 Choose the OSD Settings page
Ü
3 Here you can alter all aspects of
hotkey operation.
4 For more details, please see the
AdderLink XDIP full user guide.
ADMIN - OSD Settings
Receiver 1
Configure OSD Settings
General
Language
Keyboard
OSD Mouse Launch
Hotkeys
Next Channel Hotkey
Previous Channel Hotkey
OSD Hotkey
Disconnect Hotkey
OSDTimeout
OSD Settings
Setup Channels
Manage Ports
Advanced
Software Upgrade
RECEIVER
Update this node’s OSD timeout and hotkeys.
ApplyCancel
English
gb
None
Left Ctrl Left Alt
Letter
Letter
Left Ctrl + Left Alt +
Left Ctrl + Left Alt +
Left Ctrl + Left Alt +
Left Ctrl + Left Alt + x
c
min1
Restoring an XDIP node
In order to obtain the full benet of the conguration wizard when creating a new installation, it may
be necessary to restore the default settings to your XDIP nodes. This can be done in two ways:
• [Receiversonly] Display the channel list and then click the icon. If requested, enter the admin
password and then choose the Software Upgrade page. Click the Restore button.
• Use a narrow implement (such as a straightened out paper clip) to press and hold the recessed reset
button on the front panel (while power is applied) for fourteen seconds. Note:Theresetbuttonis
withintheholetotheleftoftheUSBsocket.The front panel indicators will ash and then the Recovery
page will be displayed. Click the Restore button.
INDOOR USEONLYCOMPUTERCONSOLE
Audio
line
in
jack
Audio
line
out
jack
HDMI
video port
12VDC power
port
(PoE option
available)
USB
ports
On TX:[Optional]Feed
toalocalconsole
On RX:Feedtothe
userconsole
HDMI
video port
USB
port
On TX:Linktothe
maincomputer
On RX:[Optional]Link
toalocalcomputer
Data link - either
connect directly to
another node or
indirectly to multiple
others via a supported
network switch*
(PoE 802.3af supported)
www.adder.com
ADDERLINK
LNKUSB VID PWR
USB
port
(Console)
Indicators
LNK - indicates the presence of a valid data link.
USB and VID - indicate active connections.
PWR - indicates the presence of input power (coloralso
indicatesoverallmode:TX:Green,RX:Blue,Start of Life:Red).
Reset
button
Connect and power on all required nodes. On the console connected to an uncongured node, that
will become a receiver, you should see the Welcome screen. The node’s PWR indicator should be red
at this stage. If not, restore the node to its default settings (seetherearpage). Continued overleaf.
*Thenetworkswitchmustsupport
IGMP-seethefulluserguidefordetails.

ADDER AdderLink XDIP Specifications

General

Type	Transmitter & receiver
Material	Metal
Certification	CE, FCC
Product color	Black
LED indicators	Link, Power, USB, Video
Cable types supported	Cat5, Cat6, Cat7
Connectivity technology	Wired
Maximum transfer distance	100 m
Maximum digital resolution	1920 x 1200 pixels
Operating temperature (T-T)	0 - 40 °C
Input current	0.7 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
AC adapter output voltage	12 V
USB 2.0 ports quantity	4
Receiver local video port type	HDMI
RJ-45 ports quantity (receiver)	1
Receiver local keyboard/mouse port type	USB
Weight	600 g
Dimensions (WxDxH)	169 x 120 x 31 mm
Package depth	290 mm
Package width	248 mm
Package height	55 mm
Cables included	Audio (3.5mm), HDMI, USB
AC adapter included	Yes
Harmonized System (HS) code	84733080