Do you have a question about the Addictive audio PURE P250.1 and is the answer not in the manual?
Exercise care when drilling or cutting near automotive lines.
Amplifier protection feature prevents damage from misuse or faulty conditions.
Adjusts time correction of music signals to prevent phasing cancellation or blurring.
Controls HPF, LPF, or FULL range output for different speaker systems.
Controls high pass crossover point for speaker outputs, attenuating frequencies below.
Allows boosting low frequency response (45Hz) up to +18dB.
Controls low pass crossover point for speaker outputs, attenuating frequencies above.
Eliminates ultra low frequencies, protecting speakers from excessive excursion.
Matches amplifier gain to source unit output level (0.2V to 6.0V).
Input signal from source unit via RCA cable.
Allows signal to pass through to another amplifier.
Indicates power status, protection modes (short circuit, thermal), and clipping.
Selects HPF frequency range multiplier (x1 or x10).
Selects input configuration for multiple RCA pairs.
Allows signal to pass through to another amplifier.
Input signal from source unit through RCA cable.
Matches amplifier gain to source unit output level (0.2V to 6.0V).
Adjusts time correction of music signals to prevent phasing cancellation or blurring.
Controls high pass crossover to eliminate ultra low frequencies (10-55Hz).
Controls low pass crossover (50-250Hz) for subwoofers.
Adjusts the center frequency for Bass EQ boost (20-85Hz).
Boosts the Center Frequency up to +12dB.
Enables or disables the Bass EQ features.
Allows external bass knob adjustment for subwoofer volume.
Connects multiple amplifiers for strapping.
Sets amplifier role (Master/Slave) when strapping.
Indicates power status, protection modes, and clipping.
Steps for disconnecting battery, wiring, and setting initial controls.
Steps for setting volume, gain, filters, and EQ for optimal sound.
| Brand | Addictive audio |
|---|---|
| Model | PURE P250.1 |
| Category | Amplifier |
| Language | English |