05
⑤ Please
⑥
⑦
refer to picture 2.1.3 to remove the supporting foot, end cover, plastic liquid reservoir and parts 12 and 13. Use a 22 mm wrench
to remove the pre-pressurization cylinder and part 14.
Exchange the damaged parts, and reassemble the parts in reverse order.
Pre-pressurization piston parts list.
10.Plastic liquid reservoir
9.End cover
1312
8.Supporting foot
11.Pre-pressurization
Cylinder
Need to add
thread-locking adhesives
Picture.2.1.3
12
14
To Next Page
Loading...
