Need help?Do you have a question about the Additel 761A and is the answer not in the manual?
General| Brand | Additel |
|---|---|
| Model | 761A |
| Category | Test Equipment |
| Language | English |
Provides a general overview of the ADT761A Automated Pressure Calibrator.
Details the key features and capabilities of the ADT761A Calibrator.
Specifies the required environmental conditions for operating and storing the calibrator.
Outlines power specifications, including working time and charging details.
Lists technical specifications for various models of the ADT761A calibrator.
Details the basic physical structure and components of the calibrator.
Explains the different electrical and signal ports on the calibrator.
Describes the keypad layout and its associated functions.
Details the pressure ports available on the calibrator for connections.
Covers the initial steps required before operating the calibrator.
Provides instructions for installing or removing the battery.
Explains how to connect pressure instruments to the calibrator.
Guides on how to position and view the calibrator's display.
Covers the initial steps to start using the calibrator.
Instructions on how to turn the calibrator on.
Procedure for setting the device's date and time.
Steps to generate and control pressure using the calibrator.
Describes the display interface and general operation of the calibrator.
Details the layout and components of the calibrator's home screen.
Explains the information displayed in the status bar.
Describes display areas for modules and split-screen functionality.
Instructions for operating the calibrator using the keypad.
Guides on how to control and manage pressure generation and output.
Guides on how to output and control pressure from the calibrator.
Instructions for performing pressure measurements with the calibrator.
How to change pressure units for internal or external modules.
Covers the functions for measuring electrical signals like current and voltage.
Procedures for measuring current and voltage signals.
Details on how to perform switch tests using the calibrator.
Explains HART communication setup and operation with the calibrator.
Explains PROFIBUS PA communication setup and operation.
Describes how to configure and perform electrical output functions.
Information on connecting and using external pressure modules.
Presents common applications and usage scenarios for the calibrator.
Application details for calibrating pressure gauges.
Application details for calibrating pressure transmitters.
Application details for calibrating HART transmitters.
Application details for calibrating pressure switches.
Application details for calibrating I/P converters.
Configuration options for pressure control parameters.
Settings for connecting the calibrator via Ethernet, Wi-Fi, or Bluetooth.
Instructions for configuring Ethernet communication.
Settings for connecting the calibrator to a wireless network.
Instructions for Bluetooth connection to mobile applications.
Options for managing the calibrator's power and battery.
Adjusts the brightness of the calibrator's LCD screen.
Displays the current battery status and information.
Configures energy-saving features like auto-backlight and shutdown.
Procedures for calibrating the calibrator's internal modules and external sensors.
Steps for calibrating the electrical measurement functions.
Procedure for optimizing controller parameters for improved performance.
Calibrates the supply pressure module's sensors.
Calibrates the internal barometric pressure sensor.
Calibrates the calibrator's pressure measurement and output modules.
Provides access to device services like firmware upgrades and maintenance.
Instructions for upgrading the calibrator's firmware via USB or remotely.
Accesses maintenance records and system board upgrade information.
Restores user settings and clears data to factory defaults.
Customizes device settings like date, time, language, and sound.
Sets the current date and time on the calibrator.
Allows selection of the user interface language.
Configures audible alerts and volume settings.
Enables and configures connection to cloud services for monitoring.
Options for managing and exporting saved data files.
Displays detailed information about the calibrator's hardware and software.
Shows model, serial number, firmware, and operation time details.
Information about the control panel's software and hardware versions.
Details on the electrical measurement board's versions and parameters.
Information on the electrical source board's versions and parameters.
Details about the Wi-Fi and Bluetooth module versions.
Information on the PROFIBUS module's firmware and hardware.
Details about the HART handheld communicator's DD library version.
Enters a function for performing quick tests on various devices.
Procedure for performing a quick test on a pressure gauge.
Procedure for performing a quick test on a pressure transmitter.
Procedure for performing a quick test on a pressure switch.
Procedure for performing a quick test on a pressure sensor.
Procedure for performing a quick test on an I/P converter.
Procedure for performing a quick test on a signal isolator.
Manages and executes predefined calibration tasks.
Task settings and execution for analog pressure gauges.
Task for calibrating pressure transmitters, measuring output values.
Task settings and execution for pressure transducers.
Task settings and execution for pressure switches.
Task settings and execution for I/P converters.
Task settings and execution for signal isolators.
Task settings and execution for contact pressure gauges.
Task settings and execution for valve opening gauges.
Performs quick tests specifically for barometric pressure versions.
Procedure for performing a quick test on a digital barometer.
Procedure for performing a quick test on a barometric altimeter.
Procedure for performing a quick test on a pressure transmitter.
Procedure for performing a quick test on a pressure switch.
Manages and executes calibration tasks for barometric (BP) versions.
Task settings and execution for digital barometers.
Calibrates a mercury barometer.
Calibrates an aneroid barometer.
Calibrates a barometric altimeter.
Task settings for pressure transmitters (BP version).
Task settings for pressure switches (BP version).
Converts between different pressure units.
Performs pressure leak detection tests.
Steps to connect and search for HART devices.
Detailed operations for the HART communicator function.
Accesses and displays device information.
Provides information on detected abnormalities and diagnostic results.
Checks the sealing performance of the calibrator.
Instructions for replacing the suction filter.
Guides on replacing the outlet filter and o-ring.
Instructions for replacing the air filter.
To Next Page
