Additel 761A - 5.3 Quick test (for barometric (BP) version)

112
custom
Transfer function
Linear, square root, square
Type of transfer function of the valve opening gauge
Owner
Letter, numeral, symbol
Owner of the valve opening gauge
Location
Letter, numeral, symbol
Location of the valve opening gauge
Notes
Letter, numeral, symbol
Notes of the valve opening gauge.
Table 5- 11 Task mode valve opening gauge information
3. Task setting
For the contents, refer to Section 5.2.1 Task setting for calibration of the analog pressure gauge.
4. Task start
For some contents, refer to Section 5.2.1 Task start for calibration of the analog pressure gauge.
 Set loop power settings as necessary.
5. Task end
For the contents, refer to Section 5.2.1 Task end for calibration of the analog pressure gauge.
5.3 Quick test (for barometric (BP) version)
Click the main menu icon on the main interface, and then select the icon on the main menu
that pops up to enter the quick test function, and the calibrator displays the test type list.
5.3.1 Digital barometer
1. Prepare