Cleaning
19
Radio Wall Clock CK 1603
English
Cleaning
NOTE on material damage
− Do not immerse the clock in water or other liquids.
− Never use harsh or abrasive cleaning agents or the like to clean the
clock. If you do, the surface could be scratched.
− Dust the clock if necessary with a soft, dry cloth. The glass can also be cleaned with
commercially available glass cleaners.
Fault/Remedy
Fault Possible Cause
No function Is the battery empty or has it been inserted
incorrectly?
No radio signal reception See “Tips for good reception”. Set the time
manually, as needed.
The indicated time is obviously
incorrect
Check whether devices with very strong
magnetic elds are located in immediate
proximity to the clock (e.g. TV set). Remove
such devices or choose a dierent location
for the clock.
Start the radio signal transmission again.
Technical Data
Model: Radio Wall Clock CK 1603
Battery:
1x LR6 (AA), 1,5 V
Rated current: 3 mA
Distributor (no service address): Waagen-Schmitt GmbH
Hammer Steindamm 27-29
22089 Hamburg, Germany
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.
Druckbuch Funkwanduhr CK 1603.indb 19 24.03.2016 13:15:56
To Next Page
Loading...
