ADE CK 2301 - Setting the time manually

37
CK 2301 DCF radio-controlled clock
English
4. Manually perform settings if reception is not
possible at your location, see "Setting the
time manually".
Setting the time manually
 If more than 20 seconds elapse between
two button presses, the setting process
is terminated automatically, and you
have to start over.
 Each push of a button is confirmed
with a beep.
1. Keep the
button pressed until BEEP ON
appears on the display.
2. Use the button
or to select ON or OFF
(OFF = you will no longer hear a beep when you
press the button).
3. Press
to save the setting.
The display shows TIME ZONE, and "00" flashes,
where "00" means your current time zone.
4. Use button
or to select the time zone of
your current location ("00" is the default setting
for mainland Europe).
5. Proceed as described:
− Press the button or to set the
desired value.
− Press
each time to save the setting.
6. Perform the following settings one after the
other: